Español
Home garage doors are used very often, usually opened and closed several times a day. That’s why maintaining your automatic garage door is very important. This article will show you how to DIY maintain your home garage door to make sure it always works smoothly.
1.Appearance Maintenance
Every time you use the sectional garage door, check if the door panels have any scratches or rust. Also check if the weatherstripping is worn out or damaged. If the sectional garage door weatherstripping is falling off or cracked, replace it in time to keep the garage sealed properly.
2.Operation Maintenance
When opening and closing the garage door, check if the rollers are worn out or stuck. If the rollers are worn, replace them with the same type. If the door gets stuck while moving, check if the track is bent. If the bend is small, you can fix it with a rubber hammer. If it’s badly bent, the track should be replaced in time.
3.Spring Inspection and Maintenance
The spring is a very important part of the garage door’s balance system. Be sure to check it carefully every month for any signs of breakage, bending, or looseness. If you find any problem with the spring, stop using the garage door right away and call a professional to replace it. Replacing the spring can be dangerous, so do not try to fix it yourself. To make the spring last longer, you can apply anti-rust oil once a year to help prevent rust and breakage.
4.Motor and Control System Maintenance
Keep the motor surface clean and dry to avoid dust and moisture getting inside. Check the motor chain or belt tension every six months. If it’s loose, adjust it to the right tightness according to the manual. If the remote control doesn’t work, check if the battery needs to be replaced.
Conclusion
Regular garage door maintenance can extend its performance and help it run as smoothly as possible.
If you have any questions about garage doors or sectional industrial doors, feel free to contact Xufeng Door. Our professional technical team is here to help you!
